HT-Cu75 Copper agent
| product name | model | use | Instructions | features | Process parameters | Specification |
| Titanium boron agent | HT-Ti4OB4 | Adjust the composition of alloying elements to replace the aluminum master alloy. | According to the content of alloying elements in the produced alloy grades and the results of furnace analysis, calculate the actual yield of 95%, the required amount of additives, after removing the slag, directly disperse and soak in the aluminum molten pool evenly, and wait for the small flame to disappear Finally, artificial stirring should be properly strengthened to make it diffuse evenly, and a certain diffusion time should be guaranteed according to the actual situation. | The element content is 75%, and the silicon content is 95%.
The actual yield is greater than 95%. The actual recovery rate of iron powder is greater than 90%. The shelf life is one year. |
Operating temperature: 740°C-760°C.
Melting time: 15-30 minutes. |
1. 500g/block
Density: 3.8-4.2kg/cm³ Si: 2.5g/cm³ |
| Titanium | HT-Ti75 | |||||
| Manganese | HT-Mn75 | |||||
| copper agent | HT-Cu75 | |||||
| Iron | HT-Fe75 | |||||
| Chromium agent | HT-Cr75 | |||||
| Nickel agent | HT-Ni75 | |||||
| Zinc agent | HT-Zn75 | |||||
| Fast Solvent | HT-Si95 |
Write your message here and send it to us